Apollo 82-203-04 Ball Valve 1/2″ BRS

#10

Apollo 82-203-04 Ball Valve

• Manufacturer: Apollo Valves is a trusted manufacturer of industrial valves, fittings, and other flow control products. Their valves are used in a variety of industries such as HVAC, plumbing, oil and gas, and general industrial applications.

• Model: 82-203-04

• Type: Ball Valve

  • Ball valves are widely used for controlling the flow of fluids and gases. They use a rotating ball inside the valve body to either open or close the flow path. When the hole in the ball is aligned with the valve body, flow is allowed; when the ball is turned to block the hole, flow is stopped. Ball valves are simple, durable, and provide quick on/off operation.

• Size: 1/2 inch (This refers to the valve’s pipe connection size, meaning it is intended for use with 1/2-inch pipe or tubing. The size indicates the internal diameter of the pipe the valve will connect to.)

• Material: Brass (BRS) construction means the valve is made of brass, a corrosion-resistant, durable material that’s often used in fluid and gas systems, especially in plumbing and HVAC applications. Brass is also more cost-effective than stainless steel while still providing good resistance to corrosion, especially in water and low-pressure applications.

Product Features

• Full-Port or Standard-Port: The Apollo 82-203 series ball valves are typically standard-port valves, meaning that the bore inside the valve is slightly smaller than the diameter of the pipe, causing a slight pressure drop compared to a full-port valve. However, standard-port valves are more compact and are still widely used in most applications.

• End Connections: The 82-203 series features threaded ends, which means it is designed for use with threaded pipe connections, such as NPT (National Pipe Thread). Threaded ball valves are common for easy installation and disconnection, making them ideal for applications where the valve may need to be replaced or serviced periodically.

• Handle Operation: Typically, the valve comes with a manual handle (lever), allowing for easy operation. A quarter-turn of the handle rotates the internal ball to either allow or stop the flow of fluid or gas. It is a reliable method for on/off control in most systems.

• Pressure Rating: While specific pressure ratings may vary by manufacturer, brass ball valves like the Apollo 82-203-04 series are generally rated for 150 PSI at 150°F, which is suitable for most residential and commercial water or gas systems. Be sure to check the exact pressure and temperature ratings for your specific application.

Applications

• Plumbing: Brass ball valves are often used in residential and commercial plumbing systems for water control. The 1/2-inch size is particularly common for shut-off valves in water supply lines, sinks, toilets, and showers.

• HVAC: In heating, ventilation, and air conditioning (HVAC) systems, brass ball valves control the flow of water, steam, or gases. These valves are commonly used in heating or cooling loops, water treatment systems, and other HVAC applications.

• General Industrial Use: Ball valves like the Apollo 82-203-04 can also be used in various industrial applications where reliable shut-off control is needed for gases, oils, and chemicals in low-pressure systems.

Additional Considerations

• Durability: Brass valves are durable and resistant to corrosion but are not as resistant to aggressive chemicals or high temperatures as stainless steel valves. For most typical plumbing, water, and low-pressure gas applications, however, they perform well.

• Seal Type: Many ball valves, including the 82-203 series, use soft seats (such as PTFE or Teflon) to ensure a tight seal. This material is known for its resistance to chemicals, temperature extremes, and wear.

• Flow Control: This valve is designed for on/off flow control. Ball valves like the 82-203 series are generally not used for throttling or regulating flow, though they can be used in systems where full-open or full-closed positions are required.

Where to Find More Information

• Product Datasheet: For more precise details such as pressure and temperature ratings, dimensions, and installation instructions, you can consult the datasheet for the Apollo 82-203-04 model. These datasheets are available from the Apollo Valves website or through distributors.

• Distributors and Suppliers: The Apollo 82-203-04 ball valve is widely available from industrial supply distributors such as:

  • Grainger
  • Ferguson
  • SupplyHouse
  • Amazon (for smaller orders)
  • Direct from Apollo or authorized distributors

Conclusion

The Apollo 82-203-04 ball valve is a 1/2-inch, brass-constructed valve designed for on/off flow control in plumbing, HVAC, and general industrial systems. The threaded connections make it easy to install in systems that use threaded piping, and the brass material provides a good balance of strength and corrosion resistance for general-purpose applications.

If you’re considering buying or using this valve, it’s a reliable choice for low-pressure applications in plumbing and HVAC systems, as well as in light industrial settings.

Let me know if you need more specific information on installation, ordering, or technical details!